Attention: Here be dragons

This is the latest (unstable) version of this documentation, which may document features not available in or compatible with released stable versions of Redot.

Your second 3D shader

From a high-level, what Redot does is give the user a bunch of parameters that can be optionally set (AO, SSS_Strength, RIM, etc.). These parameters correspond to different complex effects (Ambient Occlusion, SubSurface Scattering, Rim Lighting, etc.). When not written to, the code is thrown out before it is compiled and so the shader does not incur the cost of the extra feature. This makes it easy for users to have complex PBR-correct shading, without writing complex shaders. Of course, Redot also allows you to ignore all these parameters and write a fully customized shader.

For a full list of these parameters see the spatial shader reference doc.

A difference between the vertex function and a fragment function is that the vertex function runs per vertex and sets properties such as VERTEX (position) and NORMAL, while the fragment shader runs per pixel and, most importantly, sets the ALBEDO color of the MeshInstance3D.

Your first spatial fragment function

As mentioned in the previous part of this tutorial. The standard use of the fragment function in Redot is to set up different material properties and let Redot handle the rest. In order to provide even more flexibility, Redot also provides things called render modes. Render modes are set at the top of the shader, directly below shader_type, and they specify what sort of functionality you want the built-in aspects of the shader to have.

For example, if you do not want to have lights affect an object, set the render mode to unshaded:

render_mode unshaded;

You can also stack multiple render modes together. For example, if you want to use toon shading instead of more-realistic PBR shading, set the diffuse mode and specular mode to toon:

render_mode diffuse_toon, specular_toon;

This model of built-in functionality allows you to write complex custom shaders by changing only a few parameters.

For a full list of render modes see the Spatial shader reference.

In this part of the tutorial, we will walk through how to take the bumpy terrain from the previous part and turn it into an ocean.

First let's set the color of the water. We do that by setting ALBEDO.

ALBEDO is a vec3 that contains the color of the object.

Let's set it to a nice shade of blue.

void fragment() {
  ALBEDO = vec3(0.1, 0.3, 0.5);
}
../../../_images/albedo.png

We set it to a very dark shade of blue because most of the blueness of the water will come from reflections from the sky.

The PBR model that Redot uses relies on two main parameters: METALLIC and ROUGHNESS.

ROUGHNESS specifies how smooth/rough the surface of a material is. A low ROUGHNESS will make a material appear like a shiny plastic, while a high roughness makes the material appear more solid in color.

METALLIC specifies how much like a metal the object is. It is better set close to 0 or 1. Think of METALLIC as changing the balance between the reflection and the ALBEDO color. A high METALLIC almost ignores ALBEDO altogether, and looks like a mirror of the sky. While a low METALLIC has a more equal representation of sky color and ALBEDO color.

ROUGHNESS increases from 0 to 1 from left to right while METALLIC increase from 0 to 1 from top to bottom.

../../../_images/PBR.png

Note

METALLIC should be close to 0 or 1 for proper PBR shading. Only set it between them for blending between materials.

Water is not a metal, so we will set its METALLIC property to 0.0. Water is also highly reflective, so we will set its ROUGHNESS property to be quite low as well.

void fragment() {
  METALLIC = 0.0;
  ROUGHNESS = 0.01;
  ALBEDO = vec3(0.1, 0.3, 0.5);
}
../../../_images/plastic.png

Now we have a smooth plastic looking surface. It is time to think about some particular properties of water that we want to emulate. There are two main ones that will take this from a weird plastic surface to nice stylized water. The first is specular reflections. Specular reflections are those bright spots you see from where the sun reflects directly into your eye. The second is fresnel reflectance. Fresnel reflectance is the property of objects to become more reflective at shallow angles. It is the reason why you can see into water below you, but farther away it reflects the sky.

In order to increase the specular reflections, we will do two things. First, we will change the render mode for specular to toon because the toon render mode has larger specular highlights.

render_mode specular_toon;
../../../_images/specular-toon.png

Second we will add rim lighting. Rim lighting increases the effect of light at glancing angles. Usually it is used to emulate the way light passes through fabric on the edges of an object, but we will use it here to help achieve a nice watery effect.

void fragment() {
  RIM = 0.2;
  METALLIC = 0.0;
  ROUGHNESS = 0.01;
  ALBEDO = vec3(0.1, 0.3, 0.5);
}
../../../_images/rim.png

In order to add fresnel reflectance, we will compute a fresnel term in our fragment shader. Here, we aren't going to use a real fresnel term for performance reasons. Instead, we'll approximate it using the dot product of the NORMAL and VIEW vectors. The NORMAL vector points away from the mesh's surface, while the VIEW vector is the direction between your eye and that point on the surface. The dot product between them is a handy way to tell when you are looking at the surface head-on or at a glancing angle.

float fresnel = sqrt(1.0 - dot(NORMAL, VIEW));

And mix it into both ROUGHNESS and ALBEDO. This is the benefit of ShaderMaterials over StandardMaterial3Ds. With StandardMaterial3D, we could set these properties with a texture, or to a flat number. But with shaders we can set them based on any mathematical function that we can dream up.

void fragment() {
  float fresnel = sqrt(1.0 - dot(NORMAL, VIEW));
  RIM = 0.2;
  METALLIC = 0.0;
  ROUGHNESS = 0.01 * (1.0 - fresnel);
  ALBEDO = vec3(0.1, 0.3, 0.5) + (0.1 * fresnel);
}
../../../_images/fresnel.png

And now, with only 5 lines of code, you can have complex looking water. Now that we have lighting, this water is looking too bright. Let's darken it. This is done easily by decreasing the values of the vec3 we pass into ALBEDO. Let's set them to vec3(0.01, 0.03, 0.05).

../../../_images/dark-water.png

Animating with TIME

Going back to the vertex function, we can animate the waves using the built-in variable TIME.

TIME is a built-in variable that is accessible from the vertex and fragment functions.

In the last tutorial we calculated height by reading from a heightmap. For this tutorial, we will do the same. Put the heightmap code in a function called height().

float height(vec2 position) {
  return texture(noise, position / 10.0).x; // Scaling factor is based on mesh size (this PlaneMesh is 10×10).
}

In order to use TIME in the height() function, we need to pass it in.

float height(vec2 position, float time) {
}

And make sure to correctly pass it in inside the vertex function.

void vertex() {
  vec2 pos = VERTEX.xz;
  float k = height(pos, TIME);
  VERTEX.y = k;
}

Instead of using a normalmap to calculate normals. We are going to compute them manually in the vertex() function. To do so use the following line of code.

NORMAL = normalize(vec3(k - height(pos + vec2(0.1, 0.0), TIME), 0.1, k - height(pos + vec2(0.0, 0.1), TIME)));

We need to compute NORMAL manually because in the next section we will be using math to create complex-looking waves.

Now, we are going to make the height() function a little more complicated by offsetting position by the cosine of TIME.

float height(vec2 position, float time) {
  vec2 offset = 0.01 * cos(position + time);
  return texture(noise, (position / 10.0) - offset).x;
}

This results in waves that move slowly, but not in a very natural way. The next section will dig deeper into using shaders to create more complex effects, in this case realistic waves, by adding a few more mathematical functions.

Advanced effects: waves

What makes shaders so powerful is that you can achieve complex effects by using math. To illustrate this, we are going to take our waves to the next level by modifying the height() function and by introducing a new function called wave().

wave() has one parameter, position, which is the same as it is in height().

We are going to call wave() multiple times in height() in order to fake the way waves look.

float wave(vec2 position){
  position += texture(noise, position / 10.0).x * 2.0 - 1.0;
  vec2 wv = 1.0 - abs(sin(position));
  return pow(1.0 - pow(wv.x * wv.y, 0.65), 4.0);
}

At first this looks complicated. So let's go through it line-by-line.

position += texture(noise, position / 10.0).x * 2.0 - 1.0;

Offset the position by the noise texture. This will make the waves curve, so they won't be straight lines completely aligned with the grid.

vec2 wv = 1.0 - abs(sin(position));

Define a wave-like function using sin() and position. Normally sin() waves are very round. We use abs() to absolute to give them a sharp ridge and constrain them to the 0-1 range. And then we subtract it from 1.0 to put the peak on top.

return pow(1.0 - pow(wv.x * wv.y, 0.65), 4.0);

Multiply the x-directional wave by the y-directional wave and raise it to a power to sharpen the peaks. Then subtract that from 1.0 so that the ridges become peaks and raise that to a power to sharpen the ridges.

We can now replace the contents of our height() function with wave().

float height(vec2 position, float time) {
  float h = wave(position);
  return h;
}

Using this, you get:

../../../_images/wave1.png

The shape of the sin wave is too obvious. So let's spread the waves out a bit. We do this by scaling position.

float height(vec2 position, float time) {
  float h = wave(position * 0.4);
  return h;
}

Now it looks much better.

../../../_images/wave2.png

We can do even better if we layer multiple waves on top of each other at varying frequencies and amplitudes. What this means is that we are going to scale position for each one to make the waves thinner or wider (frequency). And we are going to multiply the output of the wave to make them shorter or taller (amplitude).

Here is an example for how you could layer the four waves to achieve nicer looking waves.

float height(vec2 position, float time) {
  float d = wave((position + time) * 0.4) * 0.3;
  d += wave((position - time) * 0.3) * 0.3;
  d += wave((position + time) * 0.5) * 0.2;
  d += wave((position - time) * 0.6) * 0.2;
  return d;
}

Note that we add time to two and subtract it from the other two. This makes the waves move in different directions creating a complex effect. Also note that the amplitudes (the number the result is multiplied by) all add up to 1.0. This keeps the wave in the 0-1 range.

With this code you should end up with more complex looking waves and all you had to do was add a bit of math!

../../../_images/wave3.png

For more information about Spatial shaders read the Shading Language doc and the Spatial Shaders doc. Also look at more advanced tutorials in the Shading section and the 3D sections.