Attention: Here be dragons

This is the latest (unstable) version of this documentation, which may document features not available in or compatible with released stable versions of Redot.

Killing the player

We can kill enemies by jumping on them, but the player still can't die. Let's fix this.

We want to detect being hit by an enemy differently from squashing them. We want the player to die when they're moving on the floor, but not if they're in the air. We could use vector math to distinguish the two kinds of collisions. Instead, though, we will use an Area3D node, which works well for hitboxes.

Hitbox with the Area node

Head back to the player.tscn scene and add a new child node Area3D. Name it MobDetector Add a CollisionShape3D node as a child of it.

image0

In the Inspector, assign a cylinder shape to it.

image1

Here is a trick you can use to make the collisions only happen when the player is on the ground or close to it. You can reduce the cylinder's height and move it up to the top of the character. This way, when the player jumps, the shape will be too high up for the enemies to collide with it.

image2

You also want the cylinder to be wider than the sphere. This way, the player gets hit before colliding and being pushed on top of the monster's collision box.

The wider the cylinder, the more easily the player will get killed.

Next, select the MobDetector node again, and in the Inspector, turn off its Monitorable property. This makes it so other physics nodes cannot detect the area. The complementary Monitoring property allows it to detect collisions. Then, remove the Collision -> Layer and set the mask to the "enemies" layer.

image3

When areas detect a collision, they emit signals. We're going to connect one to the Player node. Select MobDetector and go to Inspector's Node tab, double-click the body_entered signal and connect it to the Player

image4

The MobDetector will emit body_entered when a CharacterBody3D or a RigidBody3D node enters it. As it only masks the "enemies" physics layers, it will only detect the Mob nodes.

Code-wise, we're going to do two things: emit a signal we'll later use to end the game and destroy the player. We can wrap these operations in a die() function that helps us put a descriptive label on the code.

# Emitted when the player was hit by a mob.
# Put this at the top of the script.
signal hit


# And this function at the bottom.
func die():
    hit.emit()
    queue_free()


func _on_mob_detector_body_entered(body):
    die()

Ending the game

We can use the Player's hit signal to end the game. All we need to do is connect it to the Main node and stop the MobTimer in reaction.

Open main.tscn, select the Player node, and in the Node dock, connect its hit signal to the Main node.

image5

Get the timer, and stop it, in the _on_player_hit() function.

func _on_player_hit():
    $MobTimer.stop()

If you try the game now, the monsters will stop spawning when you die, and the remaining ones will leave the screen.

Notice also that the game no longer crashes or displays an error when the player dies. Because we are stopping the MobTimer, it no longer triggers the _on_mob_timer_timeout() function.

Also note that the enemy colliding with the player and dying depends on the size and position of the Player and the Mob's collision shapes. You may need to move them and resize them to achieve a tight game feel.

You can pat yourself on the back: you prototyped a complete 3D game, even if it's still a bit rough.

From there, we'll add a score, the option to retry the game, and you'll see how you can make the game feel much more alive with minimalistic animations.

Code checkpoint

Here are the complete scripts for the Main, Mob, and Player nodes, for reference. You can use them to compare and check your code.

Starting with main.gd.

extends Node

@export var mob_scene: PackedScene


func _on_mob_timer_timeout():
    # Create a new instance of the Mob scene.
    var mob = mob_scene.instantiate()

    # Choose a random location on the SpawnPath.
    # We store the reference to the SpawnLocation node.
    var mob_spawn_location = get_node("SpawnPath/SpawnLocation")
    # And give it a random offset.
    mob_spawn_location.progress_ratio = randf()

    var player_position = $Player.position
    mob.initialize(mob_spawn_location.position, player_position)

    # Spawn the mob by adding it to the Main scene.
    add_child(mob)

func _on_player_hit():
    $MobTimer.stop()

Next is mob.gd.

extends CharacterBody3D

# Minimum speed of the mob in meters per second.
@export var min_speed = 10
# Maximum speed of the mob in meters per second.
@export var max_speed = 18

# Emitted when the player jumped on the mob
signal squashed

func _physics_process(_delta):
    move_and_slide()

# This function will be called from the Main scene.
func initialize(start_position, player_position):
    # We position the mob by placing it at start_position
    # and rotate it towards player_position, so it looks at the player.
    look_at_from_position(start_position, player_position, Vector3.UP)
    # Rotate this mob randomly within range of -45 and +45 degrees,
    # so that it doesn't move directly towards the player.
    rotate_y(randf_range(-PI / 4, PI / 4))

    # We calculate a random speed (integer)
    var random_speed = randi_range(min_speed, max_speed)
    # We calculate a forward velocity that represents the speed.
    velocity = Vector3.FORWARD * random_speed
    # We then rotate the velocity vector based on the mob's Y rotation
    # in order to move in the direction the mob is looking.
    velocity = velocity.rotated(Vector3.UP, rotation.y)

func _on_visible_on_screen_notifier_3d_screen_exited():
    queue_free()

func squash():
    squashed.emit()
    queue_free() # Destroy this node

Finally, the longest script, player.gd:

extends CharacterBody3D

signal hit

# How fast the player moves in meters per second
@export var speed = 14
# The downward acceleration while in the air, in meters per second squared.
@export var fall_acceleration = 75
# Vertical impulse applied to the character upon jumping in meters per second.
@export var jump_impulse = 20
# Vertical impulse applied to the character upon bouncing over a mob
# in meters per second.
@export var bounce_impulse = 16

var target_velocity = Vector3.ZERO


func _physics_process(delta):
    # We create a local variable to store the input direction
    var direction = Vector3.ZERO

    # We check for each move input and update the direction accordingly
    if Input.is_action_pressed("move_right"):
        direction.x = direction.x + 1
    if Input.is_action_pressed("move_left"):
        direction.x = direction.x - 1
    if Input.is_action_pressed("move_back"):
        # Notice how we are working with the vector's x and z axes.
        # In 3D, the XZ plane is the ground plane.
        direction.z = direction.z + 1
    if Input.is_action_pressed("move_forward"):
        direction.z = direction.z - 1

    # Prevent diagonal moving fast af
    if direction != Vector3.ZERO:
        direction = direction.normalized()
        $Pivot.look_at(position + direction, Vector3.UP)

    # Ground Velocity
    target_velocity.x = direction.x * speed
    target_velocity.z = direction.z * speed

    # Vertical Velocity
    if not is_on_floor(): # If in the air, fall towards the floor. Literally gravity
        target_velocity.y = target_velocity.y - (fall_acceleration * delta)

    # Jumping.
    if is_on_floor() and Input.is_action_just_pressed("jump"):
        target_velocity.y = jump_impulse

    # Iterate through all collisions that occurred this frame
    # in C this would be for(int i = 0; i < collisions.Count; i++)
    for index in range(get_slide_collision_count()):
        # We get one of the collisions with the player
        var collision = get_slide_collision(index)

        # If the collision is with ground
        if collision.get_collider() == null:
            continue

        # If the collider is with a mob
        if collision.get_collider().is_in_group("mob"):
            var mob = collision.get_collider()
            # we check that we are hitting it from above.
            if Vector3.UP.dot(collision.get_normal()) > 0.1:
                # If so, we squash it and bounce.
                mob.squash()
                target_velocity.y = bounce_impulse
                # Prevent further duplicate calls.
                break

    # Moving the Character
    velocity = target_velocity
    move_and_slide()

# And this function at the bottom.
func die():
    hit.emit()
    queue_free()

func _on_mob_detector_body_entered(body):
    die()

See you in the next lesson to add the score and the retry option.